The machine is very nice looking in person, very sleek. The instruction manual is pretty sparse on details. It has enough, but it's a little intimidating for a first time user. I took my time and found out that the programming is very user friendly and easy to use. I have ours on our counter with a cabinet overhead. When I fill water reservoir I do pull the machine a bit forward because the reservoir is deep and you have to lift it straight up. It's easy to do but you need a bit of clearance. The bean hopper is in the back, so I pull the machine forward a bit to fill that, as well. Very easy to do. One thing I wanted in the J9 was the option to use a water filter. I have hard water from our tap, and had been filling our DeLonghi from our filtered refrigerator dispenser, but that was cumbersome. With the Jura filter I can fill the deep reservoir right in the little bar sink I have next to the machine. I tested the water before and after, and the Jura filter definitely works to reduce hardness, which is important in keeping the machine free from mineral scale buildup. I think it will be well worth the expense of replacing the filters. It came with one filter and a couple of descaling tabs, which I have not had to use yet.
Aside from the display, another feature of the Jura Impressa F8 that is worth mentioning is the Expert Mode. As the name suggests, this feature is ideal for coffee connoisseurs as it allows changing or adjusting the settings for all drinks programmed on the machine. It also gives users the option of adjusting the volume of the shot once it starts to brew.
Better yet, you can also customize the volume, strength and also coffee aroma in order to ensure that you prepare the ideal drink you and your friends are going to love. Other than that, the grinder uses Gaggia’s Adapting System for adjusting the RPMs which helps dispense the right amount of coffee grounds, while the wide range of coffee drinks you can make with the Brera qualify it as the best and most affordable super automatic espresso machine for coffee lovers on a budget.

The ENA Micro 1 is the simplest of all of Jura’s machines. It is the smallest machine on the list, the most affordable, and packed with the base technologies in Jura’s machines. Your beverage begins by grinding whole coffee beans in a multi-level grinder, which are then pushed through a micro brewing unit. The machine delivers a rich espresso, with a soft layer of crema on top.
Alright, for the person whose coffee/espresso interest borders on obsession (or strong passion if you will) the F7 probably won’t satisfy. Mainly because of the built-in grinder. For someone who’s aiming for perfection in their brew, a precision standalone grinder and a standalone coffee maker is going to be what they need to look for to really dial in their perfection.
It comes pre-loaded with default recipes for latte macchiato, cappuccino, an espresso shot, a ristretto shot, coffee, coffees, hot water, and steamed milk. All of the recipes can be customized via "Expert Mode". You can adjust the strength (1 - 5 beans), volume in ounces or mL's), steamed milk amount (based on time in seconds). You can also adjust all of the parameters while making the drink without saving, which is great for guests. Basic operation is very simple and straightforward. The TFT display makes this super user friendly. Anyone can easily scroll thru using the wheel on top of the machine and pick whatever type of drink they want. Or, you can select most drinks directly from the TFT screen as well. For two shots or two cups of coffee, hit the button twice. You can also enter the recipe modification mode by holding the drink selection button as well. Grind adjustment is via a knob under the back right top cover. It also displays graphics of your drink while it's being made.
It’s affordable (£70 at Argos at the time of writing; Dolce Gusto pods are priced at around £4 for a box of 16) and incredibly simple to set up and use. Simply fill the removable water tank with cold H2O, pop your chosen coffee pod into a slide-out drawer at the front, stick a cup under the spout and hit the power button. When it turns from red to green (a mere few seconds) the machine is ready. You then push the water lever either left (for cold drinks) or right (for hot drinks) until the desired amount of your drink is in the cup. Then slide out the drawer, expel the pod and throw it away.
Hate getting up in the morning? That’ll change with the Z6. Just the thought of gazing at this handsome clean, shiny chrome machine was enough to have us leaping out of bed at 6am. Brewing coffee is fairly simple and yields powerful, yet tasty cups. Espresso based drinks are a cinch to produce too—but often taste slightly watered down. The best part is though is the nearly silent grinder, which is quiet enough to run on full power without fear of waking the whole house up. —Neil Gellar
The Impressa’s control panel is based around a central colour display that’s used to guide you though the process, which helps to turn a maze of functions into an intuitive set of menus (or a carousel as Jura call it). The control of the menus is achieved by a ‘rotary switch’ located on top of the machine at the front, neatly sandwiched between the power and program buttons. The buttons either side of the screen vary in purpose, depending what’s on the screen at the time. in general though, the screen splits into four zones, with each button used to select the corresponding zone.

With many of the Jura models available in our review guide, you will be able to control the unit with a large, stunning visual screen that is controlled by buttons on the side and a rotary dial on the top of the unit. With the buttons on the side of the screen, you select a class of coffee beverage such as espresso or plain coffee. After you decide your class of drink, you can literally turn the dial and watch the different drink selections go by until you find one that suits your mood. The interface is finely tuned and at no point does it feel cumbersome or stand in your way. The Jura is an extension of your coffee desires and the only thing standing between you and your perfect drink is the press of a button. For the models that don’t feature the visual display, there is an equally easy to use and ergonomically arranged display of buttons. The three green, yellow, and red lights, coupled with the rotary knob delivery your desired beverage just as quickly and with zero confusion as to how to select it.


There are many ways to make a single coffee drink and preferences will naturally vary. With the Jura coffee machine, there are tons of opportunities to customize the details and fine-tune your daily coffee experience. If there is something you don’t like or want prepared differently, you can reprogram the ratios for certain beverages to match your personal tastes. For example, if you like you macchiato with slightly less milk (I know I do), you can adjust the ratio so there is a bit more coffee than the factory setting serves. If you like your coffee extra hot, that setting can be adjusted globally on the Jura as well. Don’t worry though, anything you customize can be reversed for a one off coffee drink in case you want to make something for a guest and they don’t necessarily share you tastes in coffee. We love that Jura understands everyone has slightly difference tastes and makes adjusting the settings of the machine easy to do.


Our final Jura Coffee Maker is technically classified as an espresso maker. As such, it’s only designed for espressos, although you can experiment to make different kinds of beverages if you want. As an espresso machine, this unit is really impressive. If you have used other similar models, you will be impressed by the quality and convenience that the Ena Micro 1 offers.
Now we’ve looked at what the machine can do, let’s turn our attention to what really matters, what real life customers think. We’ve had a good look around at reviews on the web, and collated the common themes. Hopefully this will give you a real feel for what is good and not so good about this machine, with some battle testing thrown into our Jura Impressa F8 review!
As we continue on our journey of Jura Coffee Makers, the Impressa C65 is another “standard” unit. It doesn’t have all of the accouterments of higher-end models, but it still makes an incredible cup of coffee, and it offers the speed and convenience that you would expect from Jura. Overall, we would compare this model to the ENA 9 above, although this one can make two cups at once.
There is a learning curve and one has to get the coffee to water ratio correct for one's preferences...changing it for other drinkers. But it is truly automatic, which is nice for serving more than one person quickly, brews quickly and makes very good coffee. Jura took this machine and rewired it per the wiring recall on this model, returned it, all at no cost to me.

The Jura Impressa F9 is straightforward to wash off due to the aluminum finish inside and outdoors of one’s machine. The stainless aluminum construction also makes this machine very durable and quite pleasing toward the eyes. The heater within this machine is amazingly powerful and this unit’s 16 oz reservoir to hold the water is ideal for making multiple cups of coffee.
If you’re not familiar with the term, TFT is a more high-tech version of a standard LCD. The colors are brighter, and the image is sharper, thus enabling you to see what you’re doing much more easily. The screen itself is 2.8 inches, and it uses a rotary dial to select the kind of coffee you like. What’s noticeable about the F8 is that it’s a full-service coffee maker, but it’s smaller than other models that Jura offers.
×